česky english



SUPRATECH s.r.o. Laboratory of Physics and Technology

SUPRATECH s.r.o. was established on 21 October 2008 by registration at the Regional Court in Brno under file No. C 60057. At the end of 2012, the company made several discoveries in the field of electrodynamics.

  • About our research

  • What we discovered

  • We use new tools in electrodynamics

  • What we have published and what we are going to publish

  • Well-informed subjects writing about our discoveries

  • We offer a time-limited grant

  • Investment partner

  • About our research.

    The company's initial task was to conduct applied research, particularly in the field of electrodynamics. One of the company's goals was to design a pure DC engine-generator with parameters that would exceed the commutator DC machines and eliminate the power limitation of AC machines with electronic control. The applied research of a pure DC motor consisted of a laboratory design phase in line with the current theoretical perspective as we understood it at the time, and of the planned stage of providing a design version applicable to the general electrical engineering industry. Various variants of DC machines without brushes and electronics were tested. We were also inspired by existing patents worldwide including a Czech patent, which was already out of date at that time. The final output of our applied research, although we suspected some anomalies, was still surprising. The finding that no variant of a pure DC machine is functional, combined with other previous circumstances, initiated some basic research. Experimental testing of current theoretical electrodynamics has become a priority. This was done with the help of modern technology and ideas and the discovery of the high-temperature superconducting shield from 1987. Finally, the set goals have led to several other discoveries that we would like to turn into economically viable reality.

    What we discovered

    - Capability of influencing the mutual repulsion of electrons by magnetic field. Application in the construction of high-capacity electrical capacitors based on a new physical principle.

    - Macroscopic quantum effect - frequency change as a function of the measurement angle.

    - Design of a pure DC machine (without brushes and electronic components) is technically feasible but no solution can be functional in physical terms.

    - Maxwell's equations are unrealistically general and are replaceable by a more precise level macro-energy concept of the magnetic field. We have therefore proven that the theoretical construction of a general homogeneous field without magnetic axis identification is not physically meaningful. (Identifying the magnetic axis means that we identify the energy correlations.)

    - Several forms of electromagnetic warp - direct conversion of electricity into motion impulse without a reaction base. (The reaction base may be, for example, a magnetic rail in linear motors, or a stator in rotary motors. If we wanted to be spectacular, we could write that we discovered a way to realize antigravity.)

    - We found a theoretical macroscopic energy concept and probable relations that mathematically describe the link to Maxwell's equations. (Maxwell's equations are roughly in line with the new concept, with an error of up to 50%, within approximately 67% of all theoretically possible technical solutions. There is an exact match in one group of technical solutions only - these are the most common ones used in practice.)

    We use new tools in electrodynamics.

    We have modified the Faraday's Law as follows: Induction of electrical voltage only occurs to its full extent if the conductor is oriented co-linearly with the energy equipotential magnetic field levels and moves crosses them. This is the case in most technical and experimental solutions. This special case technically implies a penetration with a virtual magnetic flux. If the conductor moves along the levels and does not change its position with respect to the magnetic axis or does not pass through the equipotential levels, induction does not occur. In the Faraday generator, the shortest conductive path connecting the peripheral and central brushes is extended in a spiral pattern due to the brush sliding on the disc. This happens across energy equipotential levels of the magnetic field. Thus, free electrons acquire a DC drift. (This is analogous to the effect of winding the conductor onto a circular magnet, which induces voltage and current.)

    We have modified the Ampere's Law as follows: The Ampere's force, as defined in the textbooks, only affects the current conductor in its entirety if the current conductor is co-linear with energy equipotential levels of the magnetic field. If this condition is met, the current conductor will move towards or away from the magnetic axis in its full force range. If the axis of the current conductor is perpendicular to the energy equipotential levels, it will only be subjected to moment forces, which preferentially rotate the current conductor so as to intersect as little energy levels of the magnetic field as possible. These moment forces cause a continuous deflection of the disk circumference with respect to the brush in the Faraday DC motor. (Rotation of the Faraday disk can be therefore explained, in terms of force, as a case of two interacting current conductors.)

    The macroscopic energy concept, as a tool for new technical solutions of direct conversion of electromagnetic energy into motion impulse without reaction base, without expulsion of matter.

    What we have published and what we are going to publish

    In the report here, we published the basics of the new energy concept of electrodynamics. We are going to publish a monograph named Extra-terrestrial electrodynamics. In its four chapters, we will show e.g. the following points of interest: an experiment in which the magnetic flux does not change and yet voltage and current are induced in the conductor; a force-based analysis of the Faraday DC motor that reveals the "mnemonics" of modern electrodynamics; an experiment in which we will absorb the same magnetic flux by shielding with the same magnitude but the results of the induced voltage will be different; and other topics including experiments with electromagnetic warp. We plan to hold a press conference to present the electromagnetic warp to the public.

    Well-informed subjects writing about our discoveries

    -The NATURE magazine published a paper describing and unsuccessful experiment, which was supposed to prove the validity of current electrodynamic concept. The report proposed a new macroscopic energy concept explaining this experimental failure of Maxwell's concept based on the continuity equation. The paper was rejected with the reason that they are more interested in publishing papers from areas that are more attractive for readers.

    - Czech Technical University in Prague was acquainted with an older version of the paper (we did not have a macro energy concept yet at that time) in which we pointed out and proved that no PHG / PHM patented anywhere in the world could work. We called upon the Dean of CTU to let anyone at the Faculty of Electrical Engineering (FEL) prove that we are wrong by demonstrating a functional machine in the sense of PHG/PHM (we have provided patent numbers across the world plus one PV in the Czech Republic).

    - We approached an active professor at Masaryk University in Brno to comment on the experiment (video here) and explain how the induced voltage is zeroed when the magnetic induction lines actually bypass the superconducting shield. His response was obligatory. It resulted in the invalidation of the technical application of superconducting shields and in the same global view of both patent applicants and patent officers.

    - We have also contacted other associate professors and professors who are highly competent in the subject matter. No one attempted to interpret the experiment with a clear solution. Answers that contradicted relativistic explanations, pointing to physical creativity, helped us better configure other demonstration devices.

    - We informed the current Chair of ASCR about our most important discovery and asked her to provide us, through specialized experts (such as the Center of Higher Science and others), with information about their majority opinion on the failure of the experiment, which was supposed to prove the validity of the Faraday's Law for homogenized magnetic field.

    Following our previous promotion activities, a prominent patent applicant from Colombia, who held a USA patent for a machine in the sense of PHG/PHM, contacted us by e-mail. In his email, he informed us that the technical implementation of his patent revealed an anomaly: the machine was inoperative.

    We offer a time-limited grant

    The reward amounted to CZK 295,000 minimum + CZK 200,000 for documented costs and was to be granted to the first person to demonstrate a functional machine in the sense of PHG/PHM..

    Investment partner

    We are considering collaboration with an investment partner interested in investing in patents in the US, EU, Japan and other countries.



    What is the practical meaning of our discovery of the physical mistake in Maxwell's equations? Currently we can demonstrate it on the failed launch of satellites for the Galileo navigation system:
    If the satellites were equipped with drive units utilizing the newly discovered direct conversion of electrical power to a kinetic impulse (our linear single-impulse experimental prototypes of drive units achieve an efficiency of approx. 0.02% with an input power of approx. 30W), there would be an elegant way of saving the mission. We know that satellites dispose of a limited amount of fuel, which is not sufficient for correction of the path from elliptical to stationary circular shape. A drive unit utilizing this new physical phenomena would cope with this problem within several weeks or months as it converts electrical power into a kinetic impulse. There is no problem on the orbit that would prevent us from generating any amount of electrical power by conversion from solar energy.

    We will try continuously, as far as possible, to attract the attention of the academic community in physics to the problem of the provable physical mistake in Maxwell's equations. We made an offer to a Czech academic physical institution during 2013, inviting them to a demonstration of a new physical phenomena; however, our offer was rejected at first encounter with a boundless faith in the theoretical status quo.

    Maxwell's theoretical mission is obsolete as it is not, in certain boundary situations encountered in technological solutions, in line with reality. (Nevertheless, in our opinion, its update does not consist in relativistic corrections but rather in the elimination of a significant physical mistake.) Our next paper to be published will demonstrate the erroneous part of the theoretical platform (in the form of an experimental guide). We are going to publish several references to patent applications for inventions, which were granted the protection status and which should be in theoretical accordance with the invention purpose but are actually not functional. These patents, after being found to be non-functional, can only be used for industrial and commercial marketing. If the owner does not manufacture a real model, they may not even know that their patent has no industrial application. For example, we know a medium-sized subject, which was granted the status of national level patent (and awaits the pending European patent - maybe it has already been granted) for their implementation of an electrical machine but, in practice (probably after it was found to be industrially unusable), started to apply this principle to their solution of a drive unit, which is an element of a functional patent of another owner.
    This makes the patent office sort of a protector of current scientific doctrines and its work is “de jure” only rather than “de facto” and “de jure” at the same time.